집 제품 주요 상품 유리 섬유 성형 격자 Fiberglass Grating Solid Top-Gritted Surface

Fiberglass Grating Solid Top-Gritted Surface
Fiberglass Grating Solid Top-Gritted Surface
Fiberglass Grating Solid Top-Gritted Surface
Fiberglass Grating Solid Top-Gritted Surface
Fiberglass Grating Solid Top-Gritted Surface

제품 성능 소개

Fiberglass Grating Solid Top with a gritted surface is a specialized type of FRP (fiberglass reinforced plastic) grating that combines the structural benefits of fiberglass with a completely sealed, non-penetrable top surface and a slip-resistant grit layer. Unlike traditional open-mesh fiberglass grating, the solid top design prevents liquids, debris, or small tools from falling through, making it ideal for environments that require maximum containment and a clean walking surface.

그만큼 gritted surface on the solid top is typically bonded with a layer of durable quartz or aluminum oxide granules. This layer provides exceptional slip resistance, even in oily, wet, or otherwise hazardous conditions. The result is a walking surface that meets or exceeds OSHA and ADA guidelines for slip prevention.

주요 특징들:

Sealed Surface: The solid top prevents contamination from above or below, making it suitable for applications where hygiene or debris control is important.
미끄럼 저항: The gritted finish offers superior traction underfoot, reducing the risk of slips and falls in high-traffic or industrial areas.
부식 방지: Made from non-metallic materials, the grating resists corrosion from chemicals, saltwater, and industrial solvents.
비전도성: Its fiberglass structure does not conduct electricity, making it ideal for use near electrical equipment.

Common Applications:

Food and beverage processing plants (non-food contact zones)
Chemical manufacturing areas
Battery charging rooms
Walkways above sensitive machinery
Utility trenches and catwalks
Offshore and marine platforms

FRP Grating Specifications & Technical Parameters

1.General Specifications

안건	설명
Product Type	Molded FRP Grating / Pultruded FRP Grating
Mesh Size	38x38 mm (1.5"x1.5") / 40x40 mm / Custom
Thickness (Height)	25 mm / 30 mm / 38 mm / 50 mm
패널 크기	1220x3660 mm / 1000x4000 mm / Custom
Open Area	60% – 70% (depending on mesh size)
표면 옵션	Gritted / Concave / Smooth / Covered Top
색상	Gray, Yellow, Green, Red, Custom

2. Mechanical Properties (Typical Values)

재산	값	Test Standard
인장강도	≥ 120 MPa (17,400 psi)	ASTM D638
굽힘 강도	≥ 200 MPa (29,000 psi)	ASTM D790
굽힘 탄성률	≥ 7,800 MPa (1.13×10⁶ psi)	ASTM D790
압축 강도	≥ 200 MPa (29,000 psi)	ASTM D695
Impact Strength (Izod)	≥ 85 J/m	ASTM D256
바콜 경도	≥ 40	ASTM D2583

3. Physical & Chemical Properties

재산	값	Test Standard
밀도	~1.8–2.0 g/cm³	ASTM D792
Water Absorption	< 0.5%	ASTM D570
Flame Retardancy	≤ 25 (Class 1)	ASTM E84
자외선 저항	Available with UV inhibitor	-
전기 전도도	비전도성	-
Thermal Conductivity	~0.25 W/m·K	ASTM C177
Operating Temperature Range	-50°C to +120°C (varies by resin)	-

4. Resin Systems Available

Resin Type	특징	Application Areas
Orthophthalic	General purpose, cost-effective	General industry, flooring
Isophthalic	Improved chemical resistance	Wastewater, food processing
비닐 에스테르	Excellent chemical and corrosion resistance	Chemical plants, offshore, mining
페놀	Fire and smoke resistance	Oil & gas, transport, marine

5. Load Table (Example for 38mm Thick Grating)

스팬(mm)	Load (kN/m²)	처짐(mm)
600	5.0	4.5
800	3.5	5.9
1000	2.0	7.6

Why Choose Us

Expertise in FRP Grating Manufacturing

With over 20 years of experience, our factory specializes exclusively in the design, development, and production of high-performance FRP (Fiberglass Reinforced Plastic) gratings. Our deep industry knowledge ensures that every product meets the most demanding industrial standards.

Advanced Technology and Equipment

We utilize state-of-the-art manufacturing equipment and precision molding technology to produce gratings with superior strength, corrosion resistance, and dimensional accuracy. Our commitment to innovation means your project benefits from the latest advancements in FRP technology.

Customized Solutions

From panel sizes and resin types to surface finishes and colors, we offer complete customization to meet your unique application needs—be it industrial flooring, stair treads, trench covers, or marine platforms.

Stringent Quality Control

Every product undergoes a rigorous quality inspection process, including load testing, flame retardance checks, and corrosion resistance analysis. Our ISO-certified quality management system ensures consistent excellence in every batch.

Competitive Pricing

We offer factory-direct pricing without compromising on quality. With optimized production processes and bulk manufacturing capabilities, we help our customers achieve cost savings at scale.

Reliable Delivery and Global Reach

We maintain a large stock of standard products and operate a streamlined logistics system, ensuring fast delivery times locally and internationally. We’ve successfully served clients in over 15 countries.

Hot-Selling Products

Fiberglass Grating Solid Top-Gritted Surface wholesale Fiberglass Grating Solid Top-Gritted Surface factory

Standard Panel Sizes	1220 mm × 3660 mm (4 ft × 12 ft) 1220 mm × 4000 mm (4 ft × 13.1 ft) 915 mm × 3050 mm (3 ft × 10 ft) 1000 mm × 3000 mm (customizable) (Other sizes can be customized according to project needs)
Thickness Options	25mm(1인치) 30 mm (1.2 inch) 38 mm (1.5 inch) — most common 50 mm (2 inch)
Mesh Size (Opening Size)	38 mm × 38 mm (1.5 inch × 1.5 inch) — Standard 40 mm × 40 mm 19 mm × 19 mm (mini-mesh for small object passage prevention)
Load Bar Width and Spacing (for Pultruded Grating)	Load bar width: typically 25 mm, 38 mm, 50 mm Load bar spacing: 25 mm, 40 mm, 50 mm center-to-center
표면 옵션	Gritted surface (anti-slip) 부드러운 표면 Covered surface (solid top)
Colors Available	Yellow (most common) 녹색 Grey Red Customized colors upon request
Common Resin Types	Isophthalic Polyester (standard corrosion resistance) Vinyl Ester (high chemical resistance) Phenolic (fire-resistant applications)

About the Factory

Anhui Tianfu New Material Co., Ltd is a leading professional manufacturer specializing in FRP moulded grating production. With over 20 years of experience in the composite materials industry, we are dedicated to delivering high-quality fiberglass reinforced plastic (FRP) solutions for a wide range of industrial and commercial applications. Our modern factory is equipped with advanced production lines, covering an area of more than 26,000 square meters. We offer a complete range of molded FRP gratings featuring superior strength, chemical resistance, fire retardancy, and anti-slip performance. At Tianfu New Material, we prioritize innovation, strict quality control, and customer satisfaction. Our products are certified to international standards and exported to over 30 countries worldwide, serving industries such as chemical plants, sewage treatment facilities, offshore platforms, and walkways. Whether you need standard sizes or customized solutions, Tianfu is your reliable partner for FRP moulded grating.

애플리케이션 시나리오

About the Factory

We are a professional FRP Grating manufacturer with 20+ years of experience. Our 26,000㎡ factory is ISO9001 certified, serving clients across 30+ countries with OEM/ODM capability. We provide customized solutions and fast delivery worldwide.

Our FRP gratings are manufactured in accordance with ISO 9001 standards and tested per ASTM E84 (Class 1 fire rating), ASTM D638/D790 for mechanical performance, and comply with BS 476 and EN 13706 standards. Third-party testing available through SGS and TUV upon request.

전시회

JEC WORLD 2023

JEC 월드 2024

CAMX 2025

SHANGHAI 2025

Certificate

FRP Moulded Grating TDS

DOWNLOAD FRP GRATING TDS

Other Products

FRP 인발 프로파일

FRP pultruded grating

FRP handrail system

FRP grating clips

VR Factory Tour

tags:

FRP FRP 격자판 grp grating manufactuer

Fiberglass Grating Solid Top-Gritted Surface

시리즈 :

유리 섬유 성형 격자 >

애플리케이션

Industrial Flooring,Marine and Offshore Platforms,Wastewater Treatment Plants,Food and Beverage Industry,Transportation Infrastructure,Construction Sites,Battery Rooms and Electrical Substations,Public and Commercial Spaces,Water Parks and Swimming Pools,Rooftop and HVAC Systems

Mesh Size :
38x38 mm (1.5
Thickness (Height) :
25 mm / 30 mm / 38 mm / 50 mm
Panel Size :
1220x3660 mm / 1000x4000 mm / Custom
Open Area :
60% – 70% (depending on mesh size)
Surface Options :
Gritted / Concave / Smooth / Covered Top
색상 :
Gray, Yellow, Green, Red, Custom

문의

자주하는 질문

질문 : What is a solid top fiberglass grating with a gritted surface? ㅏ : It is a fiberglass-reinforced grating with a sealed, flat top surface covered in a bonded grit layer for enhanced slip resistance. Unlike open-mesh grating, it prevents objects and fluids from passing through.
질문 : Where is solid top grating typically used? ㅏ : It's ideal for industrial walkways, chemical plants, battery rooms, food processing (non-contact zones), marine platforms, and areas where debris or liquid containment is important.
질문 : Is the gritted surface safe in wet or oily environments? ㅏ : Yes. The grit layer provides excellent traction and is engineered to reduce slips in wet, oily, or high-traffic conditions, even meeting OSHA and ADA anti-slip standards.
질문 : Can the solid top be pressure washed or cleaned easily? ㅏ : Yes. The sealed surface can be cleaned with water, mild detergent, or pressure washing. However, abrasive scrubbers may reduce the lifespan of the grit layer.
질문 : Is the solid top grating available in different thicknesses and sizes? ㅏ : Yes. It comes in various panel sizes and thicknesses, often from 3/4" to 2", depending on load requirements. Custom dimensions and cut-to-size options are also available.
질문 : Does it offer the same strength as open-mesh fiberglass grating? ㅏ : Solid top panels are structurally reinforced to handle industrial loads. They may even provide better weight distribution due to the continuous surface.
질문 : What resin types are available for solid top grating? ㅏ : It’s available in resin types such as isophthalic polyester, vinyl ester, and phenolic, depending on the required chemical resistance, fire retardancy, and environmental durability.

기타 관련 제품