FRP pultruded profiles are structural shapes made from fiber reinforced plastic using a continuous manufacturing process called pultrusion. This process involves pulling fibers—typically glass, carbon, or aramid—through a resin bath and then through a heated die to cure and shape the composite material into constant cross-sectional profiles. The result is a strong, lightweight, and corrosion-resistant product suitable for a wide range of industrial, commercial, and structural applications.

Common FRP pultruded profiles include I-beams, channels, angles, square and rectangular tubes, rods, and custom shapes. These profiles are widely used in industries such as construction, electrical, marine, transportation, chemical processing, and wastewater treatment. Their high strength-to-weight ratio makes them ideal for replacing steel, aluminum, or wood in environments where weight reduction, corrosion resistance, and low maintenance are critical.

One of the major advantages of FRP pultruded profiles is their resistance to environmental factors. Unlike steel, FRP does not rust or degrade in wet or chemically aggressive environments. It also offers excellent resistance to UV exposure, moisture, and a wide range of chemicals. Additionally, FRP is non-conductive and thermally insulating, making it well-suited for electrical and high-temperature environments.

The pultrusion process enables precise control over fiber placement and resin content, ensuring consistent mechanical performance and dimensional stability across production batches. This results in profiles that exhibit excellent tensile strength, flexural strength, and impact resistance while remaining lightweight and easy to fabricate.

FRP pultruded profiles are easy to install using standard tools, and they require little to no maintenance over their service life. Their durability, combined with long-term cost savings, make them a popular choice for engineers and designers seeking advanced materials with superior performance in demanding environments.

FRP Pultruded Profile Specifications & Technical Parameters

1. Common Profile Types

• Structural Shapes: I-beams, H-beams, angles, channels, Z-profiles
• Tubular Profiles: Square tubes, rectangular tubes, round tubes
• Flat Shapes: Flat bars, plates, rods
• Custom Profiles: Designed to meet project-specific requirements

2. Dimensions

• Standard Widths/Heights: 25 mm to 300 mm+ (varies by profile type)
• Wall Thickness: 3 mm to 25 mm
• 길이: Standard lengths from 3 m to 6 m (custom lengths available)

3. Material Composition

• Resins:
  • Polyester: General-purpose, economical
  • Vinyl Ester: Enhanced chemical resistance
  • Epoxy: High mechanical strength
• Fiber Types:
  • E-glass: Most commonly used for general strength
  • S-glass or Carbon Fiber: For higher strength or stiffness
  • Surface veil: Added for UV resistance and smooth finish

4. Mechanical Properties (Typical values)

• 인장 강도: 200 – 600 MPa
• Flexural Strength: 250 – 800 MPa
• Compressive Strength: 200 – 500 MPa
• Modulus of Elasticity (Flexural): 17 – 25 GPa
• Impact Resistance: Medium to high (depends on resin/fiber)

5. Physical Properties

• 밀도: 1.6 – 2.0 g/cm³
• 열팽창 계수: 6 – 10 ×10⁻⁶ /°C
• Operating Temperature Range: -40°C to +110°C (higher with special resins)
• Fire Retardancy: Available (with additives or special resin systems)

6. Electrical & Environmental Performance

• 유전체 강도: > 10 kV/mm
• 비전도성: Electrically insulating
• 내식성: Excellent against water, salts, and chemicals
• UV 저항: Optional UV-inhibiting additives or surface veil
• 수분 흡수: Typically < 0.5%

7. Standards & Compliance

• ASTM D638 / D790 / D695: For tensile, flexural, and compressive testing
• EN, ISO, or customized standards: As per regional or industry needs
• Fire & Smoke Ratings: UL 94, ASTM E84 (available on request)

Why Choose Us

Hot-Selling Products

애플리케이션 시나리오

About the Factory

전시회

Certificate

Other Products

VR Factory Tour