太阳能走道 FRP 模制光栅

太阳能走道FRP模制光栅

项目规格

地点：广西省

应用：太阳能电池板之间的屋顶走道

产品名称：方孔模压格栅

项目概况

该项目位于广西省，建筑面积约2658平方米。主体为钢筋混凝土框架结构，屋顶盖板为现浇钢筋混凝土梁、板，屋顶为平屋顶（局部天井采用玻璃顶）。需要在屋顶安装光伏设备，以光伏发电为主要可再生能源，结合雨水收集、水循环利用等回收措施，实现环境资源的可持续利用。

2023 年 8 月，由于之前与 TFN 的成功项目，负责该项目的公司联系了我们，并邀请我们参与该项目，该项目包括屋顶走道。这些走道将用于维护最近安装的太阳能电池板的屋顶。光伏板的铺设需要宽度为50厘米的通道走道，需要满足耐腐蚀、防滑、高耐用、轻质、环保、绝缘、高承载能力的要求。

问题

该项目使用的材料有两个主要要求：维护人员的安全和成本效益。

Safety of maintenance personnel and cost-effectiveness. We have organized the customer’s requirements as follows:

— Non-conductive and non-thermal:

为了确保工作人员在维护太阳能电池板时的安全，材料必须不导电且导热系数低。

— Corrosion Resistant: Since this application is located on the roof of a building, it will be exposed to years of wind and sun, as well as damage to the building.

长年的风吹日晒以及用于维护太阳能电池板的化学品的侵蚀意味着材料必须能够承受这些物质对光伏走道电池板造成的损坏。

– Lightweight: The ability to move the solar panels is key. As we have mentioned in this document, the walkways between the panels provide access to different areas of the roof for maintenance, so the walkway components must be easily removable for maintenance.

— Non-slip: Windy and rainy weather can be slippery. Since sidewalks need to be used in rainy weather, they need to provide a safe, non-slip surface for those who use them.

– Low Maintenance and Long Life: The customer specifically requested a product that would not cause inconvenience during use.