-
Direct Roving for Filament Winding&Weaving 380
The 380-E6 Direct Roving is based on E6 glass formulation and coated with asilane-based sizing.It is specifically designed to reinforce both amine andanhydride cured epoxy resins for producing UD,biaxial,and multiaxial wovenfabrics.
380-E6 is suitable for use in the vacuum-assisted resin infusion process to make large wind blades.
Product performance introduction
Product Features
-
Good bonding with epoxy resin
-
Fast,unifom and complete wet-out and wet-through
-
Good abrasion resistance and low fuzz
-
Excellent mechanical properties
-
Excellent acid corrosion resistance
Specification
| Glass type | E6 | |||
| Sizing type | Silane | |||
| Typical filament diameter (μm) | 13 | 16 | 17 | 24 |
| Typical linear density (tex) | 300 | 200 | 600 1200 2400 |
4800 |
| Example | E6DR17-2400-380 | |||
Technical Parameters
| ltem | Linear density variation (%) | Moisture content (%) | Sizing content (%) | Breakage strength (N/tex) |
| Test method | ISO 1889 | ISO 3344 | /SO 1887 | ISO 3341 |
| Standard range | <600 tex:±5 ≥600 tex:±4 |
≤0.07 | 0.55～0.15 | ≥0.40 |
Mechanical properties
| Mechanical properties | Unit | Value | Resin | Test menthod |
| Tensile strength | MPa | 2315.3/2488.4 | UP/EP | ASTM D2343 |
| Tensile modulus | GPa | 82.5/82.8 | UP/EP | ASTM D2343 |
| Shear strength | MPa | 73.0 | EP | ASTM D2344 |
| Strength retention(72 hr boiling) | % | >95 | EP | / |
Instructions
- The product is best used within 12 months after production, and should be kept in the original package before use.
- Care should be taken when using the product to prevent it from being scratched or damaged.
- The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.
-
When using the product,please control the tension properly and ensure the tension uniformity.
Packaging
For detailed package size information, please download the product manual to view!
Storage
Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10℃~35℃ and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.
More products in the same series
Fiberglass products for fabrics & mats
Direct Roving for Filament Winding&Weaving 380
Series :
Fiberglass Direct Roving >application
Chemistry and Chemical / Infrastructure / Marine / Petrochemical / Building and Construction
Glass type :
E6
Sizing type :
Silane
Typical filament diameter (μm) :
13 | 16 | 17 | 24
Typical linear density (tex) :
*
Example :
E6DR17-2400-380
FAQ
Q :
Are you a factory? Where are you located?
A :
We are manufacturer of FRP grating and pultruded profiles, trader of FRP yarn materials. We are the largest distributor of China Jushi Co. We also sell products of several FRP yarn manufacturers. We are in Anhui, China.
Q :
What information is recommended for the inquiry？
A :
1. Which tex you need? 2. What the application you use it for? Or the tecnologh, is weaving, pultrusion or winding? 3. How many quantity do you need? 4. What resin do you combined for? Polyester resin or epoxy resin? 5. Do you need FOB or CIF price, if CIF, please tell us your port.
Q :
What's the MOQ?
A :
Usually 1 Ton
Q :
Package & Shipping
A :
Normal package:carton(Incuded in the unite price) Special Packge: need to charge according the actual situation. Normal shipping :your nominated Freight forwarding.
Q :
When can I offer?
A :
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
Q :
How do you charge the sample fees?
A :
If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
Q :
What's your delivery time for production?
A :
If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !
Other related products
-
Roving for Thermoplastics 910A
Product Features Excellent mechanicalproperties Hydrolysis and thermal oxygen aging resistant Shiny surface ofthe composite product without fiberrevealed Smooth process a...
-
Roving for Filament Winding&Weaving&Pultrusion 312
Product Features Smooth run-out and good process performance Fast and complete wet-out Good abrasion resistance and low fuzz Good mechanical and fatigue resi...
-
Direct Roving for Weaving 320
Product Features Excellent weavability Smooth transition between roving packages,fast and complete wetout Low fuzz Good mechanical properties of parts &...
-
Dicrect Roving for CFRT 362A
Product Features Easy unwinding Good abrasion resistance and low fuzz Good compatibilty with PP and PE resin Excellent mechanical properties of parts Excellent dispersio...
-
Direct Roving for GMT 360H
Product Features Good abrasion resistance and low fuzz Good compatibilty with PP resin Excellent mechanical properties of parts Good integrity and dispersion Sp...
-
Direct Roving for GMT - UD 360A
Product Features Low fuzz Excellent compatibility with multiple thermoplastic resins Good process performance Excellent mechanical properties Specif...
-
Direct Roving for LFT 362J
Product Features Low fuzz Excellent compatibility with multiple thermoplastic resins Good process performance Excellent mechanical properties Specif...
-
Direct Roving for LFT 362H
Product Features Low fuzz Excellent compatibility with multiple thermoplastic resins Good process performance Excellent mechanical properties Specif...