-
FRP Platform Walkways
-
FRP Platform Walkways
-
FRP Platform Walkways
-
FRP Platform Walkways
FRP Platform walkways from TFcomposite. Lightweight, high load-bearing, easy to install, non-slip, fast quotes and shipping.
Product performance introduction
 |
 |
 |
 |
 |
 |
 |
 |
FRP Platform Walkways
Molded Grating is made from polyester resin and continuous fiberglass roving, heat cured in a mold, in a hand-crafted layer-by-layer operation to produce the desired thickness and panel size. Grating produced using this technique have 30-35% (total weight) glass fiber reinforcement. The one-piece interwoven mesh construction of the molded grating produces a product with optimal corrosion resistance and bi-directional strength. Since the grating is “cast” in one piece, there is no mechanical joint between bearing bars, unlike pultruded grating where the glued joints can give way in heavy continuous traffic or after prologged service.
The high percentage of resin (65%) in molded grating provides superior corrosion resistance and optimal impact resistance. Molded fiberglass gratings with a square mesh pattern offer increased load capacity and panel utilization due to its bi-directional nature.
And for different application, the surface can be chosed from smooth, concave, gritted or solid-top.
Molded grating surface
- Concave surface
- Smooth surface
- Pattern plate
- Gritted plate
- Gritted surface
- Cross micro mesh type
- Well type Micro mesh
- High loading type
Application
FRP gratings are usually used as floor grating, marina walkway, catwalk grating,roof walkway, offshore platforms, work platforms,decks, stair treads, fencing, tree guard, drain channel cover, ditch covers, etc.
And they are widely used in petroleum, water conservancy, textile printing and dyeing, food processing, electronics industry, sewage treatment, shipbuilding, civil construction, power engineering, power substations, and chemical industries.
To find the specification and more detailed properties of our FRP grating, please feel free to contact us.
FRP molded grating equipment
FRP Molded Grating Production Process
- Mixing the rawmaterials
- Casting material
- Pull fiberglass
- Press mould
- Cooling and releasedfrom mold
- Polishing and washing
Please Feel Free To Contact Me
- Welcome to visit our factory
- Free Sample FRP Molded Grating Supplier
- JEC World 2024 - International Trade Administration
- Warehouse has sufficient supply
You can get quotation, technical advice and help around our fiberglass products.Thank you for submitting the inquiry, we will contact you soon!
FRP Platform Walkways
Series :
Main Products >application
factory workshop aisle, high-altitude aisle, console aisle, etc.
Brand name :
TFcomposite
Material :
Unsaturated polyester resin and glass fiber roving
Product including :
FRP Molded Grating With Gritted Surface and Fiberglass Handrail System
MOQ :
50pcs
FAQ
Q :
Are you a factory that produces FRP molded grating?
A :
Yes, we are a professional manufacturer of FRP gratings, we have covers an area of nearly 15,000 square meters, has nearly 120 employees, equipped more than 100 sets of standard grating molds, 15 automatic pultrusion lines.
Q :
Why choose the FRP molded with gritted surface for walkway
A :
The FRP molded with gritted surface is Non-slip, more suitable as a walkway.
Q :
What size and length does the GRP handrail tube come in?
A :
The GRP tube is only produced in 50mm o/d (outside diameter) and is stocked in 5m lengths. We can cut the tube down to length if needed.
Other related products
-
GRP Handrail System
The GRP external Swivel is a versatile in-line swivel fitting, often used where angles vary on slops, steps and landings. The GRP 116 Mid Corner is a 90° corner joint, often used...
-
5M GRP TUBE
Light weight / High strength Low Density (about 1.8), 1/4 of steel ,2/3 of aluminum.Specific strength Anti-Fire / Safety Good performance of electric insulation,10KV no voltage breakd...