• Powder Chopped Strand Mats P02

    Powder Chopped Strand Mats P02


P02 powder chopped strand Mat is made ofrandomly distributed chopped E6-CR glass strands held togetherby a powder binder. It is compatible with unsaturatedpolyester, viny ester, and epoxy resins.

As a general-purpose chopped strand mat, P02 is designed for use in hand lay-Up, filament winding and continuous laminating processes. Its end-use applications include boats, bath equipment, storage tanks, cooling towers and building components.

Product performance introduction


Product Features


  • General purpose, suitable for multiple processes

  • Good wet-through and fast wet-out in resins, easy air release. 

  • Good mechanical properties ofparts


Specification and Technical parameters



Area weight variation

Moisture content

Sizing content

Tensile breaking force


Test method

ISO 3374

ISO 3344

ISO 1887

ISO 3342


Jushi standard

≤ 300 g/m2:  ± 6 % > 300 g/m2:  ± 5 %

≤ 0. 10 %

see table below

see table below

 GB/T 17470 National standard

< 300g/m2:  ± 12 %

300 ~ 599 g/m2:  ± 10 %

≥ 600 g/m2:  ± 8 %

≤ 0. 20 %

1 . 8 %  8. 5 %,

The range should not exceed2%

< 300 g/m2:  ≥ 40 N

300 ~ 599 g/m2:  ≥ 60 N

≥ 600g/m2:  ≥ 80 N

Technical Parameters


product code

 Area weight

sizing content

Tensile breaking force

product code

Area weight

sizing content

Tensie breaking force



4. 2 %(1±31%)

≥ 80 N



2. 5 %(1±31%)

≥ 120 N



3. 2 %(1±31%)

≥ 90 N



2. 4 %(1±31%)

≥ 180 N


375 g/m2

2. 8 %(1±31%)

≥ 100 N


900 g/m2

2. 6 %(1±31%)

≥ 200 N






  • The product is best used within 12 months after production, and should be kept in the original package before use.
  • Care should be taken when using the product to prevent it from being scratched or damaged.
  • The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.
  • The cutter rollers and rubber rollers should be maintained regularly.





For detailed package size information, please download the product manual to view!




Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10~35and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.


More products in the same series





Powder Chopped Strand Mats P02



  • Product Code :
    E6CRMC225 / 225g/m2
  • Product Code :
    E6CRMC300 / 300g/m2
  • Product Code :
    E6CRMC375 / 375 g/m2
  • Product Code :
    E6CRMC450 / 450g/m2
  • Product Code :
    E6CRMC600 / 600g/m2
  • Product Code :
    E6CRMC900 / 900 g/m2


Q :

Are you a factory? Where are you located?

A :

We are manufacturer of FRP grating and pultruded profiles, trader of FRP yarn materials. We are the largest distributor of China Jushi Co. We also sell products of several FRP yarn manufacturers. We are in Anhui, China.

Q :

What information is recommended for the inquiry?

A :

1. Which tex you need? 2. What the application you use it for? Or the tecnologh, is weaving, pultrusion or winding? 3. How many quantity do you need? 4. What resin do you combined for? Polyester resin or epoxy resin? 5. Do you need FOB or CIF price, if CIF, please tell us your port.

Q :

What's the MOQ?

A :

Usually 1 Ton

Q :

Package & Shipping

A :

Normal package:carton(Incuded in the unite price) Special Packge: need to charge according the actual situation. Normal shipping :your nominated Freight forwarding.

Q :

When can I offer?

A :

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.

Q :

How do you charge the sample fees?

A :

If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.

Q :

What's your delivery time for production?

A :

If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !

Other related products